Gold Member Since 2009
Audited Supplier
I. CH Motion Co., Ltd.

Integrated Stepper Motor, Integrated Motor, Integrated Step Motor manufacturer / supplier in China, offering Integrated Stepper Motor with 0.9 and 1.8 Degree (HI Series), Hybrid Stepping Motor H601 (60mm) with 1.8 Degree, DC Gear Motor D162A1 (16mm) with Low Noise- Central Axis and so on.

(/ )

Supplier Homepage Product Other Hybrid Stepper Motor Integrated Hybrid Stepper Motor Integrated Stepper Motor with 0.9 and 1.8 Degree (HI Series)

Integrated Stepper Motor with 0.9 and 1.8 Degree (HI Series)

FOB Price: US $40-150 / Piece
Min. Order: 100 Pieces
Min. Order FOB Price
100 Pieces US $40-150/ Piece
Get Latest Price
Port: Shanghai, China
Production Capacity: 5, 000, 000 PCS/Year
Payment Terms: L/C, T/T

Request a custom order and have something just for you!

Send Customized Request
Basic Info
  • Model NO.: HI Series
  • Speed: Low Speed
  • Excitation Mode: HB-Hybrid
  • Number of Poles: 2
  • Type: Magnetic-Electric
  • Brand: I.CH
  • Size: 20mm to 86mm
  • Transport Package: Carton
  • Origin: China
  • Application: Machines
  • Number of Stator: Two-Phase
  • Function: Driving
  • Operate Mode: The Three Single Phase
  • Certification: ISO9001, CE, Rosh
  • Feature: Integrated
  • Trademark: I. CH
  • Specification: CE ROSH
Product Description
I. CH Motor presents the new HI series all-in-one closed loop motor. The controller and drive have been combined with the motor and feedback device, creating this all-in-one solution.

HI series does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. The built-in rotor position detection sensor constantly monitors the motor movement. If synchronism is about to be lost, closed loop control is used, eliminating concern over loss of steps.


Drawing:


Integrated Stepper Motor with 0.9 and 1.8 Degree (HI Series)
 
Specification
Series ModelStep angle  (°)Motor Length (mm)Rated Current (A)Phase Resistance (Ω)Phase Inductance (mH)Holding  Torque  (Kg.cm Min)Rotor Inertia (g.cm²)Lead Wire (NO.)Motor Weight (g)
HI42-a1.83412.152.42.2344220
HI42-b1.8481.71.82.84.5684360
HI42-c1.8602.11.635.8824450
Note : The above motor information is only for your information.                                
The more motor information is showed in our stepper motor catalogue.

 
HI42-a stepper motor could use CI240-2A stepper motor driver for building up an integrated stepper motor
HI42-b stepper motor could use CI240-2A or CI240-4A stepper motor driver for an integrated stepper motor
HI42-c stepper motor is corresponding to a CI240-4A stepper motor driver
 
You have to consider at least two parameters of a stepper motor to choose the right CI stepper motor driver for an integrated stepper motor: the Rated Current and the Torque
CI240-2A adopt 10-35 DC power supply and supply 0-2 amps settable output current.
CI240-4A adopt 12-35 DC power supply and supply 1.5-4 amps adjustable output current.
The UIM24004 performs much better than CI240-2A, the temperature of CI240-4A after a 8 hours continuous working is about 50 degree Celsius and the CI240-2A could reach about 60 degree Celsius which is among their working environment. The working condition influence a bit on the temperature of the stepper motor driver: if there is a big metal module on your machine for mounting the stepper motor or working with pause, the temperature of the integrated stepper motor will go down.
 
Besides this Parallel port stepper driver, you could also use CI241 Serial port with RS232 interface and CI242 CAN Bus networking stepper controllers to build up an integrated stepper motor
Send your message to this supplier
Avatar
Ms. Gem
Manager
*From:
To: Ms. Gem
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

Find Similar Products By Category